• English
  • Japanese

keiomobile2 password authentication method

Android 10

This manual is based on Android 10 (moto g8). Some details may differ depending on version, devices and environment.

  1. Click [Settings].

  2. Click [Network & internet] - [Wi-Fi].
    Turn Wi-Fi on if it is [Wi-Fi OFF].

  3. Tap Add network.

  4. In [Add network] window, fill out the network information as following.
    Network SSID: keiomobile2x
    Security: WPA/WPA2-Personal
    Password: welcome!
    [Advanced options] - Hidden network:Yes
    Click [Save].

  5. Connected to [keiomobile2x], start up the web browser and go to https://wifi-entry.user.keio.ac.jp/index.html.en
    “Generate Wi-Fi password for keiomobile2” page shows up, then click the link “Seccurity Communication RootCA2” to download the certificate.

  6. In [Name the certificate] window, enter "Security Communication RootCA2" for [Certificate name:] and "Wi-Fi" for [Credential use:].
    Click [OK].

  7. Click [Network & internet] - [Wi-Fi] - [keiomobile2x].
    On [keiomobile2x] window, click [Forget].

  8. To connect to keiomobile2, after connecting to [keiomobile2], enter the following setting.
    To connect to eduroam, after connecting to [eduroam], enter the following setting.
    EAP method: PEAP
    Phase2 authentication: MSCHAPV2
    CA certificate: Security Communication RootCA2

  9. Enter [ID] and [Password] and finally, tap [Connect].
    In the keio.jp (Keio ID) case, enter “Wi-Fi user name” and “Wi-Fi password”.
    In the ITC account case, enter “Your ITC account@user.keio.ac.jp” and “Wi-Fi connection password at ITC account”.
    ※If you are asked to enter the domain, please enter as follows
    in the keio.jp(Keio ID) case "wrcore2.itc.keio.ac.jp"
    in the ITC account case "wifi-entry.user.keio.ac.jp"

Last-Modified: February 16, 2022

The content ends at this position.